Yamaha 02R96 Manual Do Utilizador

Chapter 4—Analog I/O & the AD Input Section

AD Inputs 1 through 16 feature switchable analog inserts on 1/4-inch TRS 
phone jacks for the send and return signals. They are wired: sleeve–ground, 
ring–return, tip–send. The nominal signal level is +4 dB. 

AD Input inserts can be turned on and off individually by using the INSERT 
ON/OFF switches, so you don’t have to disconnect your external equipment in 
order to remove an insert.

See page 73 for information on the Stereo Out outputs.

See page 114 for information on the Control Room Monitor output.

See page 115 for information on the Studio Monitor output.

The 02R96 features assignable Omni Outs on balanced 1/4-inch TRS phone jacks. Omni 
Outs can be patched to Bus Outs, Aux Sends, the Stereo Out, Input or Output Channel 
Insert Outs, or Surround Monitor Channels (see page 55). In addition, Input Channel 
Direct Outs can be patched to the Omni Outs (see page 56).

The maximum output level of each OMNI OUT can be set internally to either +4 dB 
(–10 dB operating level) or +18 dB (+4 dB operating level). Contact your dealer for further 
details.

The 02R96 features two sets of 2-track analog inputs: 2TR IN ANALOG 1 
+4 dB (BAL) uses balanced 1/4-inch TRS phone jacks. 2TR IN ANALOG 2 
–10 dBV (UNBAL) uses unbalanced phono connectors. These inputs can be 
monitored via the Control Room monitors by pressing the CONTROL 
ROOM [2TR A1] and [2TR A2] buttons. They can be patched to Input 
Channels (see page 52), Input Channel Insert Ins (see page 53), or Output 
Channel Insert Ins (see page 55).