Yamaha 02R Manual Do Utilizador

Dynamics

Dynamics can be applied to the input channels (MIC/LINE 1 through 16, 
LINE 17/18 through 23/24), the tape return channels (TAPE 1 through 16), 
the internal bus outputs (BUS 1 through 8), and the stereo output. For 
stereo channels when the link is on, the dynamics processor is applied 
equally to both channels.

Shown below is the DYNAMICS display function:

Similar to the EQUALIZER display function, the DYNAMICS display 
function shows the dynamics settings for the currently selected channel 
only.

The top of the display contains the Dynamics library icon, the DYNAMICS 
icon, the main control prompts (KEY IN, ST.LINK, and optionally IN), the 
dynamics graph, and the gain reduction meter plus a level meter for the 
currently selected channel pair.

The bottom of the display is split into two main sections:

The first section shows the channel KEY IN settings and LINK icons. These 
settings can be changed by the CURSOR buttons, the encoder wheel, and 
[ENTER] button.

The second section contains the controls for adjusting the parameters for 
the currently selected channel. There are rotary icons for the threshold, 
ratio, output gain, attack, release, and so on, depending on which dynamics 
program you have selected. Use the CURSOR buttons to select the desired 
icon and adjust its value with the encoder wheel. Press the [ENTER] button 
to turn the dynamics processor on or off.