Yamaha 02R Manual Do Utilizador
Scene Memories
121
Digital Recording Console 02R User’s Guide
Fade Time
The second method of protecting the system from sudden volume level
changes is to set the fade time for each channel. When the scene memory is
recalled, the fader level will change from its previous level to the new level
of the recalled memory. You can control the duration of the change.
changes is to set the fade time for each channel. When the scene memory is
recalled, the fader level will change from its previous level to the new level
of the recalled memory. You can control the duration of the change.
Shown below is the third SCENE display function, the “Fade Time” screen:
You may have to press the [SCENE MEMORY] button several times to get
to this screen.
to this screen.
The display consists of all the “Mic”, “Tape” and “Line/Rtn/ST” channels
with a fade time value beside each. You can set the fade time from 0.0sec to
10.0sec.
with a fade time value beside each. You can set the fade time from 0.0sec to
10.0sec.
In order for the fade time you set to have any effect, you must store the
scene memory (see “Storing Mix Scenes” on page 116 of the User’s Guide).
scene memory (see “Storing Mix Scenes” on page 116 of the User’s Guide).
Note:
If you double-click the [ENTER] button on a selected channel, all the
channels will be set to the same fade time as that channel.
1.
Press the [SCENE
MEMORY] button
repeatedly until the
“Fade Time” screen
appears.
MEMORY] button
repeatedly until the
“Fade Time” screen
appears.
2.
Select the individual
channels with the [SEL]
buttons or the CURSOR
buttons. Rotate the
encoder wheel to set the
fade time value.
channels with the [SEL]
buttons or the CURSOR
buttons. Rotate the
encoder wheel to set the
fade time value.
3.
Press the [STORE] button.
Respond to the
confirmation popup by
selecting “EXECUTE” and
pressing the [ENTER]
button.
Respond to the
confirmation popup by
selecting “EXECUTE” and
pressing the [ENTER]
button.
The scene memory is
stored.
stored.
SCENE
MEMORY