Yamaha 02R Manual Do Utilizador
Automation
129
Digital Recording Console 02R User’s Guide
Main Screen
The first AUTOMIX display function screen is shown below. This is the
Main screen. From the first three screens – this screen, the Memory
Management screen, or the Fader Edit screen – you can operate the
automation transport controls:
Main screen. From the first three screens – this screen, the Memory
Management screen, or the Fader Edit screen – you can operate the
automation transport controls:
The top row of the display consists of the Time Code read-out, the current
free memory size, shown in a bargraph, kilobytes, and percentage, and
the size of the current memory buffer and the undo buffer.
free memory size, shown in a bargraph, kilobytes, and percentage, and
the size of the current memory buffer and the undo buffer.
The second row allows you to select the Communication Speed to a
computer plugged into the TO HOST connector (clock
computer plugged into the TO HOST connector (clock
÷
2, clock
×
1,
clock
×
2, or clock
×
4 – the default is 38.4kbps: clock
×
1) and set the INT
(initial) Start Time.
In the third row, you set the number of Frames per second (30, 30drop, 25,
or 24) and select the Time Code Input (SMPTE, MTC, or internal).
or 24) and select the Time Code Input (SMPTE, MTC, or internal).
The fourth row allows you to set the Automix ENABLE and select the
real-time edit Overwrite status (FADER, CH ON, PAN, or EQ).
real-time edit Overwrite status (FADER, CH ON, PAN, or EQ).
In the fifth row, you set the Edit Out RETURN and select the Fader Edit
Mode (ABSOLUTE or RELATIVE). At the end of the row is the UNDO
icon, which allows you to undo the last edit operation.
Mode (ABSOLUTE or RELATIVE). At the end of the row is the UNDO
icon, which allows you to undo the last edit operation.
The bottom row contains the automation transport control icons. Select
from the following:
from the following:
•
AUTOREC
– recording starts when the 02R receives timecode.
•
REC
– places the 02R in record ready mode.
•
PLAY
– starts playback of the automation program when timecode is
received.
•
STOP
– stops recording or playback.
•
ABORT
– stops recording and discards any data recorded.
1.
Press the [AUTOMIX]
button repeatedly to get
to the “Main” screen.
button repeatedly to get
to the “Main” screen.
2.
Use the CURSOR buttons
to select a
“Communication
Speed” check box and
press the [ENTER] button.
to select a
“Communication
Speed” check box and
press the [ENTER] button.
3.
Select the “INT Start
Time” with the CURSOR
buttons and set the
desired value by
rotating the encoder
wheel.
Time” with the CURSOR
buttons and set the
desired value by
rotating the encoder
wheel.
4.
Use the CURSOR buttons
to select the desired
“Frame” rate check box
and press the [ENTER]
button.
to select the desired
“Frame” rate check box
and press the [ENTER]
button.
5.
Select a “TC Input”
check box with the
CURSOR buttons and
press the [ENTER] button.
check box with the
CURSOR buttons and
press the [ENTER] button.
6.
Use the CURSOR buttons
to select the “Automix”
ENABLE check box and
press the [ENTER] button
to change its value.
to select the “Automix”
ENABLE check box and
press the [ENTER] button
to change its value.
7.
Select the “Overwrite”
status check boxes with
the CURSOR buttons and
press the [ENTER] button.
status check boxes with
the CURSOR buttons and
press the [ENTER] button.
continued...
AUTOMIX