Yamaha 02R Manual Do Utilizador

Página de 354
164
Digital I/O, Setup, and Utilities
Digital Recording Console 02R User’s Guide
DIO Warning OFF
 – With this option selected, the 02R will not report a 
warning when an error is detected in the digital signals being input 
from one of the digital I/O cards. When the 02R detects an error, the 
message “DIGITAL I/O Error!” is flashed on the display.
If you have a poor connection to your modular digital multitrack 
recorder or any other digital audio devices, this message may appear 
on the screen so often that it becomes distracting. You should be aware 
that if the 02R detects an error in the digital input or output, your 
recorded data may be compromised. However, some modular digital 
multitrack recorders will cause this error while performing 
synchronization during start-up.
MIDI Warning OFF
 – With this option selected, the 02R will not report 
a warning when it receives a MIDI error.
The following error conditions will not be reported: “Byte Count 
Error!”, “Check Sum Error!”, “Code Mismatch!”, “ID Mismatch”, and 
“MIDI Ch Mismatch”.
Preferences – Factory Settings
Option / Setting
Option / Setting
Auto EQ Display
ON
Transmit Key Remote
OFF
Auto PAN Display
ON
Fast Meter Fall Time
OFF
Auto ROUTING Display
ON
Pre Fader Direct Out
OFF
Auto AUTOMIX Display
OFF Slate Tone
OFF
Auto SOLO Display
OFF TC Drop Warning OFF
OFF
Store Confirmation
ON
DIO Warning OFF
OFF
Recall Confirmation
OFF MIDI Warning OFF
OFF
Mix Update Confirmation
OFF
REC Recall Safe Fader
OFF
Fader Flip Recall Safe
OFF
Remote Talk Back (C3)
OFF