Yamaha 02R Manual Do Utilizador

Installing Options

The I/O cards fall into three groups:

•

Digital I/O Cards – These cards provide 8 tracks of digital input and 
output. They are used to connect the 02R to a digital multitrack 
recorder – either tape or disk based. Cards supporting ADAT, TDIF-1, 
YAMAHA, and AES/EBU formats are available. Except for the 
CD8-AE card, these cards are single slot, allowing you to insert up to 
four cards giving you a maximum 32 tracks of digital mixdown.

•

Analog I/O Card – This card provides 8 tracks of analog input and 
output. It can be used to connect the 02R to an analog multitrack 
recorder or to expand the analog inputs and outputs of the mixer. 
Conversion is performed in 20-bit linear. The sampling frequency is the 
same as the current wordclock master on the 02R.

•

Cascade I/O Card – This card allows you to connect the bus lines 1 
through 8, two pairs of the auxiliary buses 1 through 8 to the cascade 
card’s AUX A and AUX B buses, the STEREO bus, and the SOLO bus 
of two or more 02R’s. One 02R is the cascade master, the others are 
slaves.

The following table lists the I/O cards available:

The Peak Meter Bridge (MB02) displays the levels for all the input, output, 
and bus channels of the 02R, plus it duplicates the stereo output signal 
levels. The meter bridge duplicates the information shown in the METER 
display function in a much more convenient form.

AES/EBU

CD8-AE

double 

–

 slots 1 or 2 

(max 2 cards 

–

 16 ch)

CD8-AE-S

single 

–

 all slots 1 through 4 

(max 4 cards 

–

 32 ch)

ADAT

CD8-AT

single 

–

 all slots 1 through 4 

(max 4 cards 

–

 32 ch)

TDIF-1

CD8-TD

ΙΙ

single 

–

 all slots 1 through 4 

(max 4 cards 

–

 32 ch)

YAMAHA

CD8-Y

single 

–

 all slots 1 through 4 

(max 4 cards 

–

 32 ch)

AD/DA

CD8-AD

double 

–

 slots 1 or 2 

(max 2 cards 

–

 16 ch)

CD8-CS

single 

–

 kit incl. 2 cards & con-

necting cable. slots 1 through 4 
(normally 3 or 4)