Yamaha 02R Manual Do Utilizador

Página de 354
Installing Options
187
Digital Recording Console 02R User’s Guide
Digital I/O Card 
 TDIF-1 (CD8-TDII)
The TDFI-1 digital I/O card (CD8-TDII) is used to connect TASCAM 
TDFI-1 modular digital multitrack recorders such as the DA-88 to the 02R.
Installing the CD8-TDII
The TDFI-1 digital I/O card (CD8-TDII) is a single slot card. For installation 
instructions, see “Single Slot Cards” on page 175 of the User’s Guide.
1.
Connect the TASCAM DA-88 modular digital multitrack recorder 
to the 02R using the appropriate connectors.
Use the special cable to plug the connector of the CD8-AT to the 
DIGITAL I/O connector of the TASCAM DA-88 recorder.
If you have installed more than one CD8-TDII in the 02R and have 
more than one TASCAM DA-88 recorder, connect it in the same 
manner as the first unit.
2.
The TASCAM DA-88 recorder is equipped with a WORD SYNC OUT 
connector. Use a BNC cable to plug it into the WORD CLOCK 
 IN 
connector on the back of the 02R.
If you are using more than one TASCAM DA-88 recorder, make the 
first unit the wordclock master. There are SYNC IN/SYNC OUT 
connectors on the DA-88 recorders that allow them to run together. 
DA-38s can not be used as wordclock master, because they do not have 
a SYNC OUT connector.
02R (Word clock slave) 
75    switch=ON
CD8-TD
CD8-TD
SLOT 1
SLOT 2
WORD 
SYNC OUT
DIGITAL
I/O
DIGITAL
I/O
WORD 
CLOCK IN
TASCAM DA-88/DA-38
(Word clock slave)
TASCAM DA-88
(Word clock Master)
SYNC
IN
SYNC
OUT