Yamaha 007POTO-G0 Manual Do Utilizador
104
Directly outputting an INPUT channel
LS9-16/32 Owner’s Manual
4
Move the cursor to the port select popup
button, and press the [ENTER] key.
button, and press the [ENTER] key.
The OUTPUT PORT SELECT popup window will
appear, allowing you to select the output port that will
be patched to direct output.
appear, allowing you to select the output port that will
be patched to direct output.
1
Category tab
These tabs select the output ports that are shown in the
popup window. Each tab corresponds to the following
output ports.
popup window. Each tab corresponds to the following
output ports.
●
OMNI / 2TR OUT
Shows OMNI OUT jacks 1–8 {1–16} and 2TR
OUT DIGITAL jack.
OUT DIGITAL jack.
●
SLOT {1/2}
Shows output channels 1–16 of the slot(s) {1/2}.
●
REC IN
Shows USB memory recorder input channels.
B
Port select button
This selects the output port that is assigned to direct
output.
output.
5
Use the category tabs and the port select
buttons to select the port that will be the
direct output.
buttons to select the port that will be the
direct output.
6
Move the cursor to the CLOSE button and
press the [ENTER] key to return to the pre-
vious screen.
press the [ENTER] key to return to the pre-
vious screen.
7
Move the cursor to the direct out point
select box, and use the dial or the [DEC]/
[INC] keys to select the direct out point.
select box, and use the dial or the [DEC]/
[INC] keys to select the direct out point.
You can choose PRE HPF (immediately before the
high-pass filter), PRE EQ (immediately before the
EQ), or PRE FADER (immediately before the fader).
high-pass filter), PRE EQ (immediately before the
EQ), or PRE FADER (immediately before the fader).
8
Move the cursor to the DIRECT OUT ON/
OFF button, and press the [DEC]/[INC] keys
or the [ENTER] key to turn it ON.
OFF button, and press the [DEC]/[INC] keys
or the [ENTER] key to turn it ON.
This enables the direct output you specified.
9
As necessary, move the cursor to the
DIRECT OUT LEVEL knob and use the dial
or the [DEC]/[INC] keys to adjust the level of
the direct output.
DIRECT OUT LEVEL knob and use the dial
or the [DEC]/[INC] keys to adjust the level of
the direct output.
LS9-16
1
2
• As an alternate method of specifying a direct output, you can
select an INPUT channel as the output source of an output
port (
port (
HINT