Yamaha 1100 Manual Do Utilizador

The operations for this page apply to step 2 of the procedure on page 124.

Set this to ON to enable automatic replacement of 
the XG voices (in XG song data) with the special 
voices of the PSR-2100/1100. To use the normal 
XG voice set, turn this off.

VOICE
Calls up the VOICE display, from which you can select the desired voice (page 57). When the 
Style part is selected, neither Organ Flutes voices nor User voices can be selected. When the 
Song part is selected, User voices cannot be selected.
PANPOT
Determines the stereo position of the selected voice or track. A setting of 0 pans the sound hard 
left, while 64 is at center, and 127 is at hard right.
VOLUME
Determines the level of each channel, giving you fine control over the balance of all the parts.

Selects the XG voices to 
be replaced (voices 
usually used when 
playing back)

Selects the voices used to replace the XG voices 
(when SONG AUTO REVOICE is set to ON).

Executes the settings and closes the Auto 
Revoice Setup display.

Closes the Auto Revoice Setup screen without 
executing the settings.

Each press of this 
button switches 
among the various 
parts/channels.

Use these to select the VOICE, 
PANPOT, or VOLUME 
parameter rows.

Allows you to select 
the specific voice to 
be replaced.

Keep in mind that using the 
Revoice function may result 
in unnatural or unexpected 
sound, depending on the 
particular song data.

ALL REVOICE
Replaces all of the replaceable 
XG voices with the rich and 
authentic voices of the PSR-
2100/1100.

BASIC REVOICE
Replaces only the recommended 
voices that are suitable for playing 
back the song.

ALL NO REVOICE
All the voices are returned to the 
original XG voices.

These let you select 
the voice of each 
part, and adjust the 
panpot and volume.

The [RHY2] categories in 
the STYLE PART display are 
only for the Drum Kit/SFX Kit 
(percussion) voice.

n

The [RHY1] channel in the 
STYLE PART display can be 
assigned to any voice except 
for the Organ Flutes voice.

n

When playing GM song data, 
channel 10 (in the SONG 
CH 9 - 16 page) can only be 
used for a Drum Kit voice.

When changing the rhythm/
percussion voices (drum 
kits, etc.) of the accompani-
ment style and song from 
the VOICE parameter, the 
detailed settings related to 
the drum voice are reset, 
and in some cases you may 
be unable to restore the 
original sound. In the case 
of song playback, you can 
restore the original sound 
by returning to the begin-
ning of the song and playing 
back from that point. In the 
case of accompaniment 
style play, you can restore 
the original sound by select-
ing the same style again.