Yamaha 1100 Manual Do Utilizador

The explanations here apply to step #3 of the procedure on page 136.

You can save your custom panel settings to the Registration Memory presets, and call them up by pressing the 
appropriate REGISTRATION MEMORY buttons [1] - [8]. The convenient Registration Sequence function lets you call up 
the presets in any order you specify, by simply using the [BACK]/[NEXT] buttons or the pedal as you play.

This lets you specify the settings you want to be maintained or left unchanged, even when changing Registration 
Memory presets. For details, see page 89.

Turns the Registration 
Sequence function 
on/off. When this is 
set to “ON,” the 
programmed 
Registration 
Sequence is shown at 
the top right of the 
Main display, and you 
can step through the 
sequence in this 
display by using the 
[BACK]/[NEXT] 
buttons or the pedals.

Determines which pedal is used to advance 
(increment) through the sequence.

Determines which 
pedal is used to 
reverse (decrement) 
through the sequence.

Determines how Registration 
Sequence behaves when 
reaching the end of the 
sequence.
Stop
Pressing the [NEXT] button or 
the “advance” pedal has no 
effect. The sequence is 
“stopped.”
Top
The sequence starts again at 
the beginning.
Next Bank
The sequence automatically 
moves to the beginning of the 
next Registration Memory bank 
in the same folder.

Indicates the file name of the selected 
Registration Memory bank.

Indicates the Registration Memory preset 
numbers, in the order of the current 
Registration Sequence.

These move the cursor position in the sequence.

Replaces the number at the cursor position with the 
currently selected Registration Memory number.

Inserts the number of the currently 
selected Registration Memory preset 
immediately before the cursor position.

Deletes the number at the 
cursor position.

Deletes all Registration 
Memory numbers in the 
sequence.

When you are using the pedal 
to call up specified presets, you 
can easily reset the Registra-
tion Sequence and go back to 
the first entry by holding down 
the pedal for a few seconds 
(the red box indicator at the top 
right of the MAIN display goes 
out). Press and release the foot 
pedal to re-select the first entry 
in the sequence.

n

Setting Registration Sequence 
Enable to “ON” overrides any 
other Pedal settings (for ped-
als assigned to “Regist (+) 
Pedal” and “Regist (-) Pedal” 
here). These include the pedal 
settings on page 142, and in 
Voice Set on page 146.

n

When both “Regist (+) Pedal” 
and “Regist (-) Pedal” are set 
to “OFF,” the pedals cannot be 
used to step through the Reg-
istration Sequence; only the 
[BACK]/[NEXT] buttons can 
be used in the MAIN display.

n

When both “Regist (+) Pedal” 
and “Regist (-) Pedal” are set 
to the same pedal, “Regist 
(+) Pedal” takes priority.

Registration Sequence data 
is included as part of the 
Registration Memory bank 
file. To save your newly pro-
grammed Registration 
Sequence, store the current 
Registration Memory bank 
file (page 38, 47). Any Regis-
tration Sequence data is lost 
when changing Registration 
Memory banks, unless 
you’ve stored it with the Reg-
istration Memory bank file.