Kawasaki ninja zx-10r Manual Do Utilizador
21
Spring Plate Assembly
The ZX-10R engine is used with the leaf sprig built in type steel plate assembly (spring
plate assembly) in the clutch. The spring plate assembly are available for increase the
spring constant. When outbreak the starting judder, use the spring plate assembly of the kit
parts. Whenever the plate thickness is difference for adjusting the clutch plate, take care
the length [A].
plate assembly) in the clutch. The spring plate assembly are available for increase the
spring constant. When outbreak the starting judder, use the spring plate assembly of the kit
parts. Whenever the plate thickness is difference for adjusting the clutch plate, take care
the length [A].
Part Number Spring Constant
ID Color
13089-0003 Standard
None
13089-0011
40 % up comparison standard
White
13089-0012
60 % up comparison standard
Blue
※Identification Color: The ID marks are on the springs between the steel plates.
Transmission
Type B ~ D of the kit gears are available of the 2005 model ZX-10R. To change the gear
ratios with combination the gears.
ratios with combination the gears.
Remove the three steel balls (600A0500) from the output shaft assembly. This is done to
start easily the engine with the second gear.
start easily the engine with the second gear.
Replace the circlips with new ones if they were removed.