Yamaha 01V96 Manual Do Utilizador

Chapter 3—Selected Channel Window

D 

This section contains the routing, pan, and level controls and the, SOLO, and ON buttons 
for the currently selected Stereo Input Channel. ROUTING buttons 1–8 are used to route 
the channel to the Bus Outs. The STEREO button routes the channel to the Stereo Out. The 
DIRECT button routes the channel to its Direct Out, and the Direct Out parameter below 
it selects a Direct Out destination. The F.PAN button turns on and off the Bus Out Follow 
Pan function. The PAN control is used to pan the channel. The SOLO button is used to solo 
the channel, the ON button, to turn on and off the channel, and the channel fader, to set the 
channel level.

E 

This section contains the Aux Send controls for the currently selected Stereo Input Channel. 
Use the rotary controls to set the Aux Send levels, and click them to turn Aux Sends on and 
off. Use the button below each Aux Send control to select pre-fader or post-fader. In Fixed 
mode, this button is used to turn Aux Sends on and off (the level is fixed at nominal).

When Aux Sends are paired, a heart icon is displayed between them, and the odd-numbered 
Aux Send control sets the level, while the even-numbered control works as a pan control.

F 

This section contains the Fader and Mute group functions for the currently selected Stereo 
Input Channel. Use the FADER GROUP buttons to add the channel to Fader groups, and 
use the MUTE GROUP buttons to add it to Mute groups.

This is the Selected Channel window for Bus Outs.

2

3

4

1

7

6

5