Yamaha aw16g Manual Do Utilizador
Quick loop sampler
122
Deleting an unwanted sample
Here’s how you can delete unused data (before the start
point and after the end point) from a specific sample, or
completely erase an individual sample.
point and after the end point) from a specific sample, or
completely erase an individual sample.
1
In the Quick Loop Sampler section, repeat-
edly press the [SAMPLE EDIT] key or hold
down the [SAMPLE EDIT] key and use the
CURSOR [
edly press the [SAMPLE EDIT] key or hold
down the [SAMPLE EDIT] key and use the
CURSOR [
]/[
] keys to access the MEM-
ORY page of the SAMPLE screen.
In this page you can delete the unused portion of a
sample, or erase an unwanted sample.
sample, or erase an unwanted sample.
1
One Shot/Loop mode
This icon indicates whether One Shot mode (
) or
Loop Mode (
) is selected for the sample assigned
to the pad.
B
Pad number
Indicates the pad number 1–4.
C
Size
This area graphically indicates the memory size of
each sample. The horizontal line indicates the
amount of memory used by each pad.
each sample. The horizontal line indicates the
amount of memory used by each pad.
D
PAD
E
BANK
These select the pad (1–4) and sample bank (A–D)
to which the operation will apply.
to which the operation will apply.
F
Sample name
Indicates the name of the sample for the pad and
sample selected in
sample selected in
4
and
5
.
G
ERASE button
Erases the specified sample.
H
EXTRACT button
Discards the unused portions (before the start point
and after the end point) of the specified sample.
and after the end point) of the specified sample.
Tip!
Tip!
For details on how to adjust the start point and end point
of a sample, refer to page 118.
of a sample, refer to page 118.
2
Move the cursor to the PAD/BANK fields, and
turn the [DATA/JOG] dial to select the pad
and sample bank.
turn the [DATA/JOG] dial to select the pad
and sample bank.
The procedure after this point will depend on the func-
tion that you want to execute.
tion that you want to execute.
■ To erase the entire sample
1
To erase the entire selected sample, move the
cursor to the ERASE button and press the
[ENTER] key.
cursor to the ERASE button and press the
[ENTER] key.
A popup window will ask you to confirm that you
want to erase the sample.
want to erase the sample.
2
To execute the erasure, move the cursor to
the OK button and press the [ENTER] key.
the OK button and press the [ENTER] key.
If you decide to cancel, move the cursor to the
CANCEL button and press the [ENTER] key.
CANCEL button and press the [ENTER] key.
■ To delete the unused portions of the
selected sample
1
Move the cursor to the EXTRACT button and
press the [ENTER] key.
press the [ENTER] key.
A popup window will ask you to confirm that you
want to delete the data.
want to delete the data.
2
To execute the deletion, move the cursor to
the OK button and press the [ENTER] key.
the OK button and press the [ENTER] key.
If you decide to cancel, move the cursor to the
CANCEL button and press the [ENTER] key.
CANCEL button and press the [ENTER] key.
7
8
6
12
3
4
5