Yamaha aw16g Manual Do Utilizador

129

Moves the specified region of data to the specified loca-
tion of the specified track. This is similar to COPY, but 
differs in that the move-source data will be deleted.

● For an audio track

● For a pad track (loop)

● For a pad track (one shot)

■ Parameter list

The parameters are the same as for the COPY command.

However, you cannot select CLIP for 

1

 From TRACK. 

Also, there is no 

L

 To Times setting.

*1.

2

 From V.TR and 

9

 To V.TR can be selected only if 

From TRACK=1–16, 1/2–15/16, or STEREO.

*2.

3

 From PAD and 

J

 To PAD can be selected only if 

TRACK=PAD.

*3. Measure lock function (

6

 Start Measure Lock, 

7

 End 

Measure Lock)
“Measure lock” is a function that matches the beginning 
of the measure or beat included in the copy-source 
region with the desired location of the copy-destination.
To use the measure lock func-
tion, move the cursor to the 
measure display field of From 
Start or From End, specify the 
measure/beat location that 
will be the reference point for the matching, and press 
the [ENTER] key. A “lock” icon will appear beside the 
value that you specified, and the measure lock function 
will be turned on for From Start or From End. (This can 
be turned on for either Start or End, not both.)
While the measure lock function is on, the value of that 
measure display format setting will be fixed, and cannot 
be modified. In this state if you use the counter display 
format field to specify the From Start and From End loca-
tions, and execute the copy, the location you specified in 
the measure display format field will be aligned with the 
copy-destination To Start setting.

● When measure lock = on

*4. The possible choices for 

8

 To TRACK (copy-destination 

track) will depend on your selection for 

1

 From TRACK 

(copy-source track).
If 

1

 From TRACK is a single audio track 1–16, you will be 

able to select only a single audio track 1–16.
If 

1

 From TRACK is CLIP, STEREO, 1/2–15/16 (a pair of 

adjacent audio tracks), you will be able to select only STE-
REO or 1/2–15/16 (a pair of adjacent audio tracks).
If 

1

 From TRACK is PAD, you will be able to select only 

PAD.
If 

1

 From TRACK is ALL (OVER) or ALL (INS), you cannot 

select TO TRACK.

*5. Grid function (

M

 GRID)

When this function is on, the To Start location cannot be 
specified in counter-display format; it can be specified 
only in measure/beat units.
By using the Grid function in conjunction with the Mea-
sure Lock function, you can easily copy measure/beat-
length segments of data whose divisions do not fall pre-
cisely on the measure or beat.

5

4

7

M

6

1 23

8 9J

K