Yamaha aw16g Manual Do Utilizador
77
Using libr
aries and scene memories
8
Details on libraries and scene memory
This section explains how to access each type of library
or scene memory, and describes the functions that are
unique to each of these screens.
or scene memory, and describes the functions that are
unique to each of these screens.
Input library
From this library you can recall EQ, dynamics, and inter-
nal effect settings to the currently selected input channel.
Use this when you want to apply EQ, dynamics, and
internal effects to the input signal that you are recording.
Library numbers 00–40 are all read-only, and 00 is data
for initializing an input channel.
nal effect settings to the currently selected input channel.
Use this when you want to apply EQ, dynamics, and
internal effects to the input signal that you are recording.
Library numbers 00–40 are all read-only, and 00 is data
for initializing an input channel.
In order to use the input library, you will need to insert
internal effect 1 or 2 into that input channel.
internal effect 1 or 2 into that input channel.
■ Recalling input library data
1
Press and hold the [INPUT SEL] key for the
desired input channel.
desired input channel.
The INPUT SETTING popup window will appear.
2
Move the cursor to the LIBRARY button and
press the [ENTER] key.
press the [ENTER] key.
A popup window will ask you whether you want to
insert internal effect 1 or 2 into that input channel.
This popup window will change as follows,
depending on how internal effects 1/2 are being
used.
insert internal effect 1 or 2 into that input channel.
This popup window will change as follows,
depending on how internal effects 1/2 are being
used.
● If the song is in the default state
● If effect 1 is already inserted into a specific input
channel
● If effects 1 and 2 are already inserted into specific
input channels
Tip!
Tip!
If an effect has already been inserted into that input
channel, the INPUT LIBRARY popup window will appear
immediately.
channel, the INPUT LIBRARY popup window will appear
immediately.
3
Move the cursor to the EFF1 or EFF2 button
and press the [ENTER] key.
and press the [ENTER] key.
The corresponding insert effect will be inserted into
the input channel, and the INPUT LIBRARY popup
window will appear.
the input channel, and the INPUT LIBRARY popup
window will appear.
1
EXIT button
Closes the popup window and returns to the previ-
ous INPUT SETTING popup window.
ous INPUT SETTING popup window.
EQ library
From this library you can recall EQ settings to the cur-
rently selected channel. Of library numbers 001–128,
numbers 001–040 are read-only, and 041–128 can be
written.
rently selected channel. Of library numbers 001–128,
numbers 001–040 are read-only, and 041–128 can be
written.
■ Recalling EQ library data
1
Use the [INPUT SEL] keys, [TRACK SEL] keys,
[STEREO SEL] key, or pads 1–4 to select the
channel into which you want to recall the EQ
settings.
[STEREO SEL] key, or pads 1–4 to select the
channel into which you want to recall the EQ
settings.
2
Perform one of the following actions to
access the LIBRARY page of the EQ screen
access the LIBRARY page of the EQ screen
• Press the [EQ] knob repeatedly
• Hold down the [EQ] knob and press the CUR-
• Hold down the [EQ] knob and press the CUR-
SOR [
]/[
] keys
• Hold down the [EQ] knob and turn it to left or
right
You can also recall EQ library data into an input
channel directly from the INPUT SETTING popup
window. To do so, move the cursor to the EQ button
in the window and press the [ENTER] key.
channel directly from the INPUT SETTING popup
window. To do so, move the cursor to the EQ button
in the window and press the [ENTER] key.
1