Yamaha CBX-K2 Manual Do Utilizador

8

■ Front Panel

q Keyboard

The CBX-K2 has a 49-key, 4-octave keyboard (C1 to C5),
featuring initial touch (velocity) control.  All note on, note
off and velocity data is transmitted via the MIDI OUT
terminal.  When used with the 

C button, the keys are

used for changing various settings and sending special
MIDI messages.  (Page 20.)

About the Functions of the CBX-K2: The functions are

divided into two groups: Group A and Group B.  The
Group A and B functions are shown on the panel, above
the left section of the keyboard. Several functions can be
used by pressing only the relevant key; in other words,
pressing 

L is not necessary.  These functions, such

as Sequencer Stop and Start, are shown on the panel
without underline.

Functions whose names appear with a dashed underline
on the panel (for example, GM ON and XG ON) require
pressing 

L.

The right section of the keyboard serves as value entry
and is used for those functions whose names are under-
lined on the panel and require value entry, such as
Program Change and Tempo.

Value entry on the CBX-K2 can be done in two number
systems: Decimal and Hexadecimal.  The keys labeled A
through F are for Hexadecimal entry.

NOTE ■ The normal (default) velocity range of the
CBX-K2 is from 1 to 127.  The range differs according
to the Touch Sensitivity setting (pages 19, 28).

These non-underlined functions can be
used without pressing 

L

.

These underlined functions require
value entry and pressing 

L

.

These functions with dashed underline
need no value entry, but require pressing

L

.

r

t u y

w e

q

i

o