Yamaha clavinova clp-330 Manual Do Utilizador
Internet Direct Connection (CLP-370/340, CLP-S308/S306)
CLP-370/340/330, CLP-S308/S306
Owner’s Manual
ENGLISH
52
Exporting the Connection Information
This procedure lets you export the detailed information on the current connection as a
text file to a USB flash memory device. You can check the information on your com-
puter.
text file to a USB flash memory device. You can check the information on your com-
puter.
Engage the function mode, then select the function number and enter the desired Sub-
modes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
modes Selection mode (refer to steps 1 – 3 for similar instructions on page 49).
1.
Select Function F9.2 (on the CLP-370/340) or F8.2
(on the CLP-S308/S306).
(on the CLP-S308/S306).
Use the
[TEMPO/FUNCTION
▼, ▲]
buttons to select Function F9.2 (CLP-370/
340) or F8.2 (CLP-S308/S306).
2.
Turn on the Export mode.
Press the
[+/YES]
buttons so that “OUt” appears on the display.
If you do not want to export the file, press the
[–/NO]
button.
3.
Start exporting.
Press the
[+/YES]
button.
A “n y” appears in the display to confirm whether you wish to export the file or
not, press the
not, press the
[+/YES]
button again.
If you do not want to export the file, press the
[–/NO]
button.
A “n
–
y” message will appear on the display if a USB flash memory device con-
tains a file with the same name as the one you are attempting to export.
Press the
Press the
[+/YES]
button to execute the overwriting operation. Press the [–/NO]
button to cancel exporting.
When exporting to the USB flash memory device is
completed, an “End” message will appear on the dis-
play. Press
When exporting to the USB flash memory device is
completed, an “End” message will appear on the dis-
play. Press
[–/NO]
or
[+/YES]
button to exit from this
display.
After exporting, connect the USB flash memory device to your computer, and
then open the text file named “ConnectionInfo.txt” in the root directory of the
USB flash memory device to check the detailed connection information.
After exporting, connect the USB flash memory device to your computer, and
then open the text file named “ConnectionInfo.txt” in the root directory of the
USB flash memory device to check the detailed connection information.
NOTE
The connection information file
does not allow you to manually
make Internet settings. The con-
nection information file is set to
“read only” and cannot be edited.
does not allow you to manually
make Internet settings. The con-
nection information file is set to
“read only” and cannot be edited.
Procedure
NOTE
The export mode cannot be
engaged while voice demo song
playback is in use, when the
[REC] button is on, or when user
song playback is active.
engaged while voice demo song
playback is in use, when the
[REC] button is on, or when user
song playback is active.
NOTE
If exporting has not successfully
been completed, an “Err” mes-
sage and the error code will
appear alternately on the display.
been completed, an “Err” mes-
sage and the error code will
appear alternately on the display.
NOTE
Error Code
You can check the description for
the error code on the Yamaha
website:
You can check the description for
the error code on the Yamaha
website:
http://music.yamaha.com/idc/