Yamaha clavinova clp-370 Manual Do Utilizador

Playing Back Songs

CLP-370/340/330, CLP-S308/S306

 

Owner’s Manual

You can play back songs recorded using the Record function (pages 30 – 35) or commercially avail-
able songs. You can also play the keyboard along with the playback.

Playing the voice demo tune.

User songs which you recorded to the instrument by using the record function (pages 
30 – 35).

Songs transferred from a computer (including commercially available songs and 
songs which have been edited on a computer). Songs can be transferred (saved) to 
the instrument by using the Musicsoft Downloader software (refer to the included 
“Accessory CD-ROM Installation Guide”). The songs are saved to an area of the 
internal memory separate from the area for recorded User songs. Up to 255 songs can 
be played back on this instrument (numbers 001 – 255).

SMF songs which have been saved from the instrument to a USB storage device (page 
37).

Commercially available songs or songs which have been edited on a computer, etc. 
and stored to a USB storage device. Up to 999 songs can be played back on this 
instrument (numbers 001 – 999).

Connect the instrument to the Internet and play back from the Internet.

The SMF format is one of the most common and widely compatible sequence for-
mats used for storing sequence data. There are two variations: Format 0 and Format 
1. A large number of MIDI devices are compatible with SMF Format 0, and most 
commercially available MIDI sequence data is provided in SMF Format 0. The SMF 
format for sequence files allows you to exchange song data between different 
sequencers. User songs recorded in this instrument are saved as SMF Format 0.

This sequence format is compatible with many of Yamaha’s MIDI devices, including 
the Clavinova series instruments. This is a common format used with various 
Yamaha software.
Among ESEQ files, Disklavier Piano Soft songs can be played back on this instru-
ment.

When playing back songs con-
taining various voices or parts 
(such as XG or GM songs), the 
voices may not sound correct or 
as intended on the original. You 
may be able to remedy this and 
make the playback sound more 
natural or appropriate by chang-
ing the Song Channel Selection 
setting (page 66) to “1&2,” so that 
only channels 1 and 2 will play 
back.

If the song cannot be selected or 
loaded, you may need to change 
the Character Code setting (page 
70).

Song data is not transmitted via 
the MIDI connections. However, 
channels 3 – 16 of Disklavier 
Piano Soft songs and non-pro-
tected External songs will be 
transmitted via the MIDI connec-
tions when the Song Channel 
Selection is set to “1&2” (page 
66).

Appropriate channels in the song 
will automatically be assigned to 
[RIGHT] and [LEFT]. Therefore, 
[RIGHT] may be assigned to a 
part other than channel 1, or 
[LEFT] to a part other than chan-
nel 2.

For the USB storage device, 
folder directories on this instru-
ment can be recognized up to 
two levels. However, the level is 
not displayed and song numbers 
001 – 999 are displayed which-
ever level the song contains.

If the metronome is being used 
during playback, the metronome 
will automatically stop when play-
back is stopped.

If the REVERB type is changed 
via the panel controls during play-
back, both the playback and key-
board reverb effects will be 
changed.

If the EFFECT type is changed via 
the panel controls during play-
back, the playback effect may be 
switched off in some cases.