Yamaha CDM-900 Manual Do Utilizador

8

To resume play, press PAUSE again (or press PLAY).
* The

button on the front panel can also be used to stop

play temporarily or to resume play.

Turn the power on.

Press DISC SKIP repeatedly until the desired disc
number appears in the display.

1

Shows the disc number selected or being played.

2

Shows the track number selected or being played.

3

Shows the time. (Refer to “Selecting time displays” on page
10.)

4

Shows the CD track numbers (up to 20). After each track is
played, its corresponding number disappears so that
remaining track numbers can be seen at a glance.

Press POWER again.

“DISC LOADING” appears in the display for a few
seconds. Then, the disc number that was played most
recently appears in the display.

The unit plays all discs in the unit from the selected one.

Note
• To play all the discs in the unit, make sure the “ALL” indicator

appears in the display. If not, press ALL.
In ALL play mode, the unit plays all the discs from the
selected one. Empty disc slots are skipped.

ALL

DISC

TRACK

6

11
16

7

12
17

8

13
18

9

14
19

5

10
15
20

1

2

3

4