Yamaha CDR400At Manual Do Utilizador
Chapter 1 - System Configuration
4
Tools
Discs
CD-R Discs
On the CDR400At, you can use conventional CD-R discs that conform
to the Recordable Compact Disc Systems Part 2 (Orange Book).
Yamaha recommends the following Yamaha CD-R discs:
to the Recordable Compact Disc Systems Part 2 (Orange Book).
Yamaha recommends the following Yamaha CD-R discs:
> CDM12Y63
(
φ
120mm, 63 minutes)
> CDM12Y74
(
φ
120mm, 74 minutes)
> CDM12Y74M (
φ
120mm, 74 minutes)
> CDM12Y74T (
φ
120mm, 74 minutes)
Read-only Discs
You can use discs with the
logo which conform to the Compact
Disc Read Only Memory standard (CD-ROM standard, Yellow Book).
If you wish to use the audio functions, use discs with the
If you wish to use the audio functions, use discs with the
logo,
which conform to the Compact Disc Digital Audio standard (Red Book).
•
Phillips screwdriver
This is used to remove the
cover of your computer, and to install the Yamaha CDR400At drive.
cover of your computer, and to install the Yamaha CDR400At drive.
•
Long nose pliers
These are used to insert or remove the
jumper pin when setting the SCSI ID
and parity settings etc.of the Yamaha
CDR400At drive.
jumper pin when setting the SCSI ID
and parity settings etc.of the Yamaha
CDR400At drive.