Yamaha 480 Manual Do Utilizador

Connect the headphones to the PHONES jack and adjust the
volume by using the OUTPUT LEVEL buttons.  At that time,
note that this adjustment will also vary the signal level output to
the amplifier.

*  If the FIXED (LINE OUT) terminals on the rear of this unit

are connected to the amplifier etc., the use of the OUTPUT
LEVEL buttons does not vary the signal level output to the
amplifier.

11

You can change the brightness of the display (or turn off the illumination) by pressing the DIMMER button.

Normal illumination

Dim

“OFF”

* While the display illumination is off, 

the AUTO DISPLAY OFF indicator 
on the front panel is illuminated.

Normal illumination

Dim

Dim

(The AUTO DISPLAY OFF indicator lights up.
In this state, if a disc is played, the display 
illumination will be turned off.)

If desired, you can change brightness of the display 
in three degrees by pressing the DIMMER button.

Normal illumination

Slightly dim

Dim

When it is not necessary to operate controls inside the control
door, close the door.

To close the door

To open the door