Yamaha clavinova cvp-501 Manual Do Utilizador
CVP-509/505:
K
e
yboard Stand Assemb
ly
CVP-509/505/503/501 Owner’s Manual
111
3
CVP-509/505: Keyboard Stand
Assembly
CAUTION
• Assemble the stand on a flat floor with ample space.
• Be careful not to confuse parts, and be sure to install all parts in the correct direc-
tion. Please assemble in accordance with the sequence given below.
• Assembly should be carried out by at least two persons.
• Be sure to use the correct screw size, as indicated below. Use of incorrect screws
can cause damage.
• Be sure to tighten up all screws upon completing assembly of each unit.
• To disassemble, reverse the assembly sequence given below.
1
Remove all parts from the box. Confirm that all
parts shown in the illustration are provided.
parts shown in the illustration are provided.
2
With the key cover closed, lean A against the
wall.
1 Spread a large soft cloth, such as a blanket on the floor in front of
the wall.
2 Place A on the cloth with the keyboard side turned to the wall.
3 Raise A from the backside, and lean A against the wall with the
keyboard side on the bottom.
Have a Phillips-head (+) screwdriver of the appropriate size ready.
B
C
E
G
F
F
A
A
D
Main unit
Front leg (left)
Front leg (right)
Rear leg
Pedal box metal
Pedal box
Bundled pedal cord
inside
inside
Rear legs metal cover
AC power cord
4 x 10 mm screws for the cover x 2
5 x 30 mm long screws x 4
5 x 18 mm short screws x 10
Washers x 4
CAUTION
To prevent the key cover from accidentally opening during
assembly, press down on the key cover, making sure that the
sheet (shown) remains in place.
assembly, press down on the key cover, making sure that the
sheet (shown) remains in place.
Assembly Parts
4 x 20 mm thin screws x 3
Protective pads x 2
CAUTION
• Be careful not to pinch your fingers.
• Do not lay the main unit upside-down on the floor.
Place the protection pads under the keyboard.
10cm
10cm
Large soft cloth
CAUTION
• The top part of the music rest is not fixed. Support the music rest
with your hand so that the music rest will not fall.
• Do not place the main unit with the rear side facing down.
Protective pads
CAUTION
Please do not touch the speaker net. Doing so may damage the
speaker inside.
speaker inside.