Yamaha CLP-990M Manual Do Utilizador
CLP-990
43
To erase recorded data from
a track, use the Channel
Clear parameter in the
“SONG SETTING” menu.
(See page 75.)
a track, use the Channel
Clear parameter in the
“SONG SETTING” menu.
(See page 75.)
5.
Play back the recorded performance.
Press the [START/PAUSE] button to play back the recorded
performance.
Press the [START/PAUSE] button to play back the recorded
performance.
When playback is complete, it automatically stops and the Clavinova
locates the top of the song. To stop playback in the middle of a song,
press the [STOP] button. You can also pause playback by pressing the
[START/PAUSE] button. Playback stops when you press the button.
locates the top of the song. To stop playback in the middle of a song,
press the [STOP] button. You can also pause playback by pressing the
[START/PAUSE] button. Playback stops when you press the button.
Re-recording TRACK 1
This section explains how to record again in case your performance was not satisfactory.
Procedure
1.
Select a voice or voices for recording, if necessary.
Repeat Step 2 on page 42 if you wish to change the previ-
ous settings.
Repeat Step 2 on page 42 if you wish to change the previ-
ous settings.
Follow the procedure from Step 3 on page 42 to re-record.
The original performance data will be overwritten by new performance data.
NOTE
When you turn off the power to the Clavinova, the recorded performance
data will be lost. If you wish to keep the recording, save the data using the
SaveToMemory parameter (page 52) or SaveToDisk parameter (page 53) in
the File menu.
data will be lost. If you wish to keep the recording, save the data using the
SaveToMemory parameter (page 52) or SaveToDisk parameter (page 53) in
the File menu.