Yamaha CLP-910 Manual Do Utilizador

CLP-910

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

Damper Pedal

0 (off)

Sostenuto

0 (off)

Soft Pedal

0 (off)

(3) Local Control (reception only)

ccH

Parameter

Data Range (vvH)

7AH

Local Control

00H (off), 7FH (on)

(4) All Notes Off

ccH

Parameter

Data Range (vvH)

7BH

All Notes Off

00H

Switches OFF all the notes that are currently ON on the specified
channel. Any notes being held by the damper pedal will continue to
sound until the pedal is released.

(5) Omni Off (reception only)

ccH

Parameter

Data Range (vvH)

7CH

Omni Off

00H

Same processing as for All Notes Off.

(6) Omni On (reception only)

ccH

Parameter

Data Range (vvH)

7DH

Omni On

00H

Same processing as for All Notes Off.

(7) Mono (reception only)

ccH

Parameter

Data Range (vvH)

7EH

Mono

00H

Same processing as for All Sound Off.

(8) Poly (reception only)

ccH

Parameter

Data Range (vvH)

7FH

Poly

00H

Same processing as for All Sound Off.

• When a voice bank MSB/LSB is received, the number is stored in

the internal buffer regardless of the received order, then the stored
value is used to select the appropriate voice when a program
change message is received.

• The Multi-timbre and Poly modes are always active. No change

occurs when OMNI ON, OMNI OFF, MONO, or POLY mode mes-
sages are received.

Data format: [CnH] -> [ppH]

CnH = Program event (n = channel number)
ppH = Program change number

Program change number
Vioce

Bank MSB Bank LSB Program Change Number

GRAND PIANO

0

112

0

E.PIANO

0

112

5

CHURCH ORGAN

0

112

19

STRINGS

0

112

48

Active sensing

[FEH]

• Transmitted every 200 milliseconds.
• If a signal is not received via MIDI for more than 400 milliseconds,

the same processing will take place for All Sound Off, All Notes Off
and Reset All Controllers as when those signals are received.

• Caution: If an error occurs during MIDI reception, the Damper and Soft

effects for all channels are turned off and an All Note Off occurs.

Data format: [F0H] -> [7FH] -> [XnH] -> [04H] -> [01H] ->

[ll H] -> [mmH] -> [F7H]

Si vous êtes très familier avec l’interface MIDI ou si vous

utilisez un ordinateur pour commander votre matériel de
musique au moyen de messages MIDI générés par
ordinateur, les données suivantes vous seront utiles et vous
aideront à commander le Clavinova.

SI usted está ya familiarizado con MIDI, o si emplea una

computadora para controlar sus aparatos musicales con
mensajes MIDI generados por computadora, los datos propor-
cionados en esta sección le ayudarán a controlar la Clavinova.

If you’re already very familiar with MIDI, or are using a

computer to control your music hardware with computer-
generated MIDI messages, the data provided in this section
can help you to control the Clavinova.

Falls Sie bereits mit MIDI vertraut sind oder einen Compu-

ter zur Erzeugung von MIDI-Steuermeldungen für die
Instrumente verwenden, können Sie sich zur Steuerung des
Clavinovas nach den im folgenden Abschnitt aufgeführten
Spezifikationen richten.

Data format: [9nH] -> [kk] -> [vv]

9nH = Note ON/OFF event (n = channel number)
kk = Note number (Transmit: 0FH ~ 72H = Eb-1 ~ F#7 /

Receive: 00H ~ 7FH = C-2 ~ G8)*

vv =  Velocity (Key ON = 01H ~ 7FH, Key OFF = 00H)

Data format: [8nH] -> [kk] -> [vv] 

(reception only)

8nH = Note OFF event (n = channel number)
kk =  Note number: 00H ~ 7FH = C-2 ~ G8
vv = Velocity

* If received value exceeds the supported range for the selected

voice, the note is adjusted by the necessary number of octaves.

Data format: [BnH] -> [cc] -> [vv]

BnH = Control change (n = channel number)
cc = Control number
vv = Data Range

(1) Bank Select

ccH

Parameter

Data Range (vvH)

00H

Bank Select MSB 00H:Normal

20H

Bank Select LSB

00H...7FH

Bank selection processing does not occur until receipt of next Pro-
gram Change message.

(2) Main Volume (reception only)

ccH

Parameter

Data Range (vvH)

07H

Volume MSB

00H...7FH

(3) Expression

ccH

Parameter

Data Range (vvH)

0BH

Expression MSB

00H...7FH

(4) Damper

ccH

Parameter

Data Range (vvH)

40H

Damper MSB

00H...7FH

(5) Sostenuto

ccH

Parameter

Data Range (vvH)

42H

Sostenuto

00H-3FH:off, 40H-7FH:on

(6) Soft Pedal

ccH

Parameter

Data Range (vvH)

43H

Soft Pedal

00H-3FH:off, 40H-7FH:on

(7) Reverb Depth

ccH

Parameter

Data Range (vvH)

5BH

Reverb Depth

00H...7FH

Adjusts the reverb send level.

Data format: [BnH] -> [cc] -> [vv]

BnH = Control event (n = channel number)
cc = Control number
vv = Data Range

(1) All Sound Off

ccH

Parameter

Data Range (vvH)

78H

All Sound Off

00H

Switches off all sound from the channel. Does not reset Note On and
Hold On conditions established by Channel Messages.

(2) Reset All Controllers

ccH

Parameter

Data Range (vvH)

79H

Reset All Controllers 00H

Resets controllers as follows.
Controller

Value

Expression

127 (max)