Yamaha CP300 Manual Do Utilizador
Convenient Functions
CP300 Owner’s Manual
52
Basic Oper
ation
This function serves as a convenient MIDI “panic” switch during performance when using a connected
external tone generator. If the connected tone generator continues to sound (stuck notes, etc.) even after you’ve
released the keys of the CP-300, using this MIDI Panic control transmits the necessary messages to stop the
tone generator from sounding continuously.
external tone generator. If the connected tone generator continues to sound (stuck notes, etc.) even after you’ve
released the keys of the CP-300, using this MIDI Panic control transmits the necessary messages to stop the
tone generator from sounding continuously.
Press the [REVERB] button while holding the [MIDI OUT] button.
A “MIDI PANIC SEND” message appears in the display.
n Keep in mind that MIDI Panic transmission will not function if MIDI transmission is set to Off (page 51).
MIDI Panic messages: All Note Off, All Sound Off, Reset All Controllers, Sustain Off, Sostenuto Off, Modulation
Depth Off, Pitch Bend Center, Channel Pressure Off
Depth Off, Pitch Bend Center, Channel Pressure Off
This parameter specifies whether the CP300’s built-in speakers produce sound (On) or not (Off ).
Pressing the [SPEAKER] button alternates between On and Off. The built-in speakers produce sound if the
lamp is lit, and do not sound if the lamp is off.
Pressing the [SPEAKER] button alternates between On and Off. The built-in speakers produce sound if the
lamp is lit, and do not sound if the lamp is off.
n If the [SPEAKER] button is lit, the built-in speakers sound normally even when using the headphones.
MIDI Panic Control
Built-in Speakers On/Off
MIDI OUT
PANEL LOCK
REVERB
CHORUS
*** MIDI PANIC SEND ***
NO
YES
A
B
D
C
SPEAKER
MIDI SETTING
CLICK
OTHER SETTING
DEMO
SPEAKER
MIDI SETTING
CLICK
OTHER SETTING
DEMO
Lit: Speaker sounds normally.
Off: Speakers do not sound.