Yamaha CP300 Manual Do Utilizador

89

Ref

erence

These are extra audio outputs in addition to the main OUTPUT L/R jacks. 
The CP300 also features professional-use balanced XLR connectors for the OUTPUT L/R jacks. This type of 
connector is used in professional studio equipment and installations. 

n • Connecting a pair of headphones does not affect audio output from the OUTPUT L/R and OUTPUT L/

MONO, R jacks. You can adjust the volume of the external audio equipment, built-in speakers or headphones 
with the [MASTER VOLUME] dial. 

• The sound monitored through the headphones is identical to the sound of the OUTPUT L/R and OUTPUT L/

MONO, R jacks. 

The CP300 also features a set of INPUT jacks. The stereo outputs from another instrument can be connected 
to these jacks, allowing you to play the sound of an external instrument through the CP300’s speakers. 
Connect the outputs from the other instrument to the INPUT L/MONO and R jacks on the rear panel. 

The sound of an instrument connected to these INPUT jacks cannot be adjusted from the CP300. Any level 
adjustments must be done from the instrument itself. 

These XLR connectors carry a balanced signal output, and are intended for use in professional studios 
and installations. If the corresponding circuitry is designed properly, however, XLR-type connectors will 
also handle unbalanced signals with no problem. Microphone cables usually have this type of connector, 
as do the inputs and outputs of most professional audio gear. 

OUTPUT L

OUTPUT R

CP300

Powered

speaker

(Left)

Powered 
speaker 
(Right)

Headphones

OUTPUT L jack

OUTPUT R jack

PHONES

jack

Mixer

Amplifier

CP300

External MIDI synthesizer/tone generator

OUTPUT L/MONO jack

OUTPUT R jack

INPUT L/MONO jack

INPUT R jack