Yamaha CRW3200 Manual Do Utilizador

The following describes how to install the CRW3200E drive as an additional 

drive for example.

Remove the front cover from the 5 ¼-inch drive bay.

Remove all cables connected to the CD-ROM or other devices to be 

replaced. Then remove the device itself from the computer.

• Be careful not to damage the various cables connected to the rear panel of 

the CD-ROM drive.

• The audio cable is usually caught by the hook at the top of the connector. 

Release the hook and remove the connector without using excessive force.

• Do not apply excessive force to the CD-ROM drive or cables.

• Hold the cable by the connector to remove the cable. Pulling the cable itself 

with excessive force may damage the wires inside.

Audio cable

IDE cable

4-pin internal 
power cable