Yamaha CRW4260t-NB Manual Do Utilizador
Chapter 1 - System Configuration
3
Chapter 1 - System Configuration
Before using the CRW4260t, make sure that you have all of the items
on the list of included items.
on the list of included items.
In order to use the CRW4260t, you will require the following.
Computer
The following operating environment is required:
•
An IBM/AT compatible computer with a 100 MHz or faster Pentium
CPU (in order to write at 4x speed), or a 100 MHz or faster 486
CPU (in order to write at 2x speed)
CPU (in order to write at 4x speed), or a 100 MHz or faster 486
CPU (in order to write at 2x speed)
•
A vacant slot in which to install a SCSI card or a pre-installed
SCSI card
SCSI card
•
A vacant half-height bay
•
Windows 3.1, Windows 95, Windows NT4.0 or Higher
•
Sufficient hard disk space
Note:
You will need about twice as much space on your hard disk as that
required by the data you wish to write to CD-ROM.
required by the data you wish to write to CD-ROM.
SCSI card
This is required in order to connect a SCSI device (the Yamaha
CRW4260t) to your computer.
CRW4260t) to your computer.
We recommend the following:
Adaptec SCSI cards: AHA-2940 (PCI), AHA-284x (VL), AHA-2740
(EISA), AHA-154x (ISA), etc.
Adaptec SCSI cards: AHA-2940 (PCI), AHA-284x (VL), AHA-2740
(EISA), AHA-154x (ISA), etc.
Software
Use writing software or packet writing software which supports the
CRW4260t.
CRW4260t.