Yamaha CVP-69A Manual Do Utilizador

The split point can be set at any key by pressing the desired key while

holding the [SPLIT] button. The split point key name will appear in the

SPLIT POINT

 section of the display.

The split point can also be set by using the 

SPLIT POINT

 LCD but-

tons, or the data dial or [+]/[–] buttons once the 

SPLIT POINT

 section

of the display has been highlighted. The keyboard guide lamp corre-
sponding to the selected split point will light.

• The dual and split modes cannot be

used at the same time.

• Whether the damper pedal affects the

left voice only, the right voice only, or
both voices is determined by the
“DAMPER RANGE” function described
on page 93 (the default is right-hand
voice only).

• The OCTAVE SHIFT function — page

91 — can be used to shift the pitch of
the left- and/or right-hand voice in the
SPLIT mode up or down one octave.

• When the ABC Single Finger or Fin-

gered mode (page 35) and the split
mode are used simultaneously, the
left-hand voice will be accompanied by
the appropriate ABC chord voices.

• The SPLIT mode balance and split

point settings affect all voice combina-
tions.

• The SPLIT mode settings are retained

even if the SPLIT mode is turned off
and on while the power remains on.
The SPLIT mode settings can also be
backed up even after the power is
turned off via the “Backup” function —
page 107.

Split Mode

BASS

DRUMS/

PERC.

SPLIT

DUAL

EFFECT

CLAVI. TONE/

SYNTH

UITAR

The default split point — F

#

2 — can be recalled by simultaneously

pressing the 

SPLIT POINT

 LCD buttons or [+] and [–] buttons.

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

The SPLIT mode can be turned off by pressing the [SPLIT] button so

that its indicator goes out.