Yamaha CVP-49 Manual Do Utilizador

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

The DUAL mode makes it possible to play two

voices simultaneously across the entire range of
the keyboard. This makes it easy to create excep-
tionally rich, thick tonal textures.

■

■

The volume balance between the two voices combined in the DUAL mode can

be adjusted by using the TEMPO [▲] and [▼] buttons while pressing both of the
active voice selectors. The selected balance value (1 … 15) will be shown on the
TEMPO display while the voice selectors and TEMPO [▲] or [▼] buttons are
held.

■ A setting of “1” sets the volume of the lowest-numbered voice to maximum and

the highest-numbered voice to minimum (no sound).

■ A setting of “8” sets both voices to the same volume (this is the default balance

setting, and can be recalled by pressing the TEMPO [▲] and [▼] buttons si-
multaneously).

■ A setting of “15” sets the volume of the highest-numbered voice to maximum

and the lowest-numbered voice to minimum (no sound).

• Hold either the TEMPO [

▲

] or [

▼

] button for continuous scrolling in the specified

direction.

• The dual mode cannot be used when the DRUMS voice is selected. Also, the

dual and split modes cannot be used at the same time.

To engage the DUAL mode simply press two voice selectors at the same time —

or press one voice selector while holding another. A voice in the 13…60 range can
be “dualed” with the panel voices by pressing the [VOICE 13-60] button and any
other voice selector at the same time (two voices in the 13…60 range cannot be
combined). The [s] and [t] buttons can then be used to select the desired 13…60
voice. The higher voice number will appear on the TEMPO display during selec-
tion.

 The voice indicators of both selected voices will light when the DUAL mode is

active. To return to the normal single-voice play mode, press any single voice selec-
tor.