Yamaha CVP-49 Manual Do Utilizador

○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○

The [REVERB] button provides a number of

digital effects that you can use for extra depth and
expressive power.

■

Each time the [REVERB] button is pressed the next effect on the reverb “list”

is selected and the corresponding indicator will light. No effect is selected when no
indicator is lit.

No effect is produced.

This setting adds a reverb effect to the sound that is similar to the type of acoustic
reverberation you would hear in a medium-size room.

For a more spacious reverb sound, use the HALL 1 setting. This effect simulates
the natural reverberation of a medium-size concert hall.

HALL 2 simulates the reverb of a very large concert hall.

“COSMIC” is an echo effect in which the sound seems to “bounce” around in the
stereo sound field.

• The ROOM effect is automatically selected when the POWER switch is turned

on.

■

The depth of the selected reverb effect can be increased or decreased by press-

ing the TEMPO [▲] or [▼] button while holding the [REVERB] button. The re-
verb depth is shown on the TEMPO display while the [REVERB] and [▲] or [▼]
buttons are held. The reverb depth range is from “0” (no effect) to “15” (maxi-
mum depth).

• Reverb depth is initially set to “8” when the power is turned on (this setting can be

recalled during reverb depth selection by pressing the TEMPO [

▲

] and [

▼

] but-

tons simultaneously).

• Hold either the TEMPO [

▲

] or [

▼

] button for continuous scrolling in the specified

direction.