Yamaha DD-35 Manual Do Utilizador

Play the Pads

The DD-35 contains a total of 148 high quality drum sounds (see the “Drum Voice List” page 17)
— and you can assign these freely to each of the four drum pads. Try assigning some different
voices and create your own “CU

” Custom Drum Kit.

• Any changes made to one of the preset drum kits will automatically be saved in the “ CU

”

Custom Drum Kit.

• Any data assigned to the custom kit will be replaced by factory default values (“ 09

”) when

the power is turned off.

• Both the Custom and “ 09

” drum kit contents are the same until modified (see the “Drum

Kit List” page 20).

Press and hold the [PAD] button.

Enable a pad for voice selection by simulta-
neously holding the [PAD] button and striking the
appropriate pad.

Select a Voice Number.

Play the Pads.

Assigning a Voice to Individual Pads (“CU

” Custom Kit)

Press and hold the

[PAD]

button, and the latest assigned voice number

is shown in the display.

The currently assigned voice number for the pad is shown in the dis-
play.

You can select the voice by repeatedly striking the pad, (while listen-
ing to the voice) or by turning the

DIAL

●

Striking the pad to select a voice.

While holding down the

[PAD]

button, strike the desired pad repeat-

edly, to increment through the voice numbers one-by-one.

●

Using the DIAL to select a voice.

Simultaneously hold down the

[PAD]

button and turn the

DIAL

clockwise to continuously step up through the voice numbers, and
turn the

DIAL

counter-clockwise to step down through the voice

numbers.

Repeat the previous steps 2 and 3 for any or all of the DD-35’s pads.

After you’ve assigned a voice to the desired pad, and you release the

[PAD]

button, the DD-35 automatically saves your edits to the custom

kit. You can now play the sounds you have assigned to the pads.

Voice number

Display

Comment

—

124

Values of 100 and over are indicated by a sin-
gle dot.