Yamaha DVX-S302 Manual Do Utilizador

■ Placing the center speaker

When placing the center speaker on top of the TV, use the 
supplied fasteners to secure the speaker.

1

Peel off the seals on one side of the fasteners and 
attach them to the bottom of the center speaker.

2

Peel off the seals on the other side of the fasteners and 
attach them to the top of the TV.

– Do not place the speaker on the TV if the top of the 

TV is uneven or narrower than the bottom surface 
of the speaker. Doing so may cause the speaker to 
fall. In this case, place the speaker inside a TV rack 
or on a level floor.

– Before attaching the fasteners to the TV, clean the 

surface with a dry cloth. A dirty or wet surface may 
weaken the adhesive force and cause the speaker to 
fall.

– Do not touch the bonding surfaces of the fasteners 

after peeling off the seals. Doing so may weaken 
the adhensive force and cause the speaker to 
fall.this installation. Use metric screw threads only.

You can attach the speakers to a wall using commercially 
available screws (Diameter: 3.5 to 4 mm, Length: 25 mm 
or more). Each speaker requires two screws.

1

Install two screws in the wall where you want to place 
the speaker.

2

Hang the speaker on the screws using the holes in the 
back of the speaker.

– To attach a speaker to a wall using screws, the wall 

must be firm. Do not attach a speaker to a wall that 
is made of weak materials such as plaster or 
veneered woods. Doing so may cause the speaker 
to fall.

– When connectiong the speakers, fix the speaker 

cables in place so that cables do not loosen. If your 
foot or hand accidentally gets caught on a loose 
speaker cable, the speaker may fall.

– After attaching each speaker, check that the 

speaker is fixed securely. YAMAHA will bear no 
reponsibility for any accidents caused by improper 
installations.