Yamaha DVX-S302 Manual Do Utilizador

■ Connecting a TV

– You only need to make one video connection from the following options (A,B,C, or D), depending on the 

capabilities of your TV.

– Do not connect the power cords until all cable connections are completed.

The SCART cable, or “Euro AV cable”, supports AV 
MONITOR OUT signal transmission, providing you with 
the best possible picture and sound. If your TV has only 
one terminal for video input, and you want to connect it 
directly to the DVD receiver, you can use the AV 
MONITOR OUT

 connector. Connect one end of the 

SCART cable to the AV MONITOR OUT connector and 
the other end to the SCART connector on your TV.

TV channels, if you use 

 terminal  to 

connect the TV. To use 

terminal, 

make sure to set the DVD receiver’s component setting to 
“

” (see page 25).

S-(separate)video connections achieve a clearer picture 
than composite video connections. Use an S-video cable 
(not supplied) to connect the DVD receiver’s 
S VIDEO

 jack to the S-video input jack (or Y/C or 

S-VHS jack) on your TV.

Use a composite video cable (yellow -supplied) to connect 
the DVD receiver’s VIDEO jack to the video input jack 
(or A/V In/Video In/Composite/ Baseband jack) on your 
TV.

Use the component video cables (red/blue/green, not 
supplied) to connect the DVD receiver’s Y P

  jacks to 

the corresponding component video input jacks (or the Y 
Pb/Cb Pr/Cr/ YUV jacks) on your TV.
Progressive scan video quality is only available when 
using Y P

 in conjunction with a progressive scan TV. 

To activate the progressive scan function see “Progressive function” on page 39.

q DIGITAL