Yamaha DVX-S302 Manual Do Utilizador

3

Press and hold PROG until “

AUTO PRESET

” appears.

→ 

If a radio station is stored in one of the earlier 

presets, the same radio station will not store under 
another preset number.

→ 

If no preset number is selected, automatic preset 

will begin from preset (1) and all former presets will 
be overridden.

You can choose to store only your favourite radio stations.

1

Tune the desired radio station (see “Tuning radio stations” on page 44).

2

Press PROG.

3

Press b / a to select a preset number.

4

Press PROG again to store.

Press b / a or use the numeric keypad (0-9) to 
select a preset number.

→ 

The waveband, preset number, then radio frequency 

appears.

Press and hold s on the front panel until “

AM XX 

DELTD

” or “

FM XX DELTD

” (

XX

: preset number) appears.

→ 

The current preset radio station is deleted.

Setting frequency step 
(Asia except Korea model)
The inter-station frequency spacing differs depending on 
the areas. Set the frequency step according to the 
frequency spacing in your area.
Choices:AM9kHz/FM50kHz, AM10kHZ/FM100kHz
Default setting: AM9kHz/FM50kHz
                                                                                                                                                                                                                                                 

1

Unplug the AC power cord from the DVD receiver 
and wait at least one minute.

2

While pressing and holding INPUT and  b on the 
front panel, plug the AC power cord to the DVD 
receiver.

3

After “

CINEMA STATION

” scrolls in the display panel, 

release the keys.

Repeat the above steps 

1

 to 

3

 to change AM band to 9kHz 

and FM band to 50kHz.