Yamaha DVX-S301 Manual Do Utilizador

■ Placing the front/surround 

You can attach the speakers to a wall using commercially 
available screws (Diameter: 3.5 to 4 mm, Length: 25 mm 
or more). Each speaker requires two screws.

1

Install two screws in the wall where you want to place 
the speaker.

2

Hang the speaker on the screws using the holes in the 
back of the speaker.

– To attach a speaker to a wall using screws, the wall 

must be firm. Do not attach a speaker to a wall that 
is made of weak materials such as plaster or 
veneered woods. Doing so may cause the speaker 
to fall.

– When connectiong the speakers, fix the speaker 

cables in place so that cables do not loosen. If your 
foot or hand accidentally gets caught on a loose 
speaker cable, the speaker may fall.

– After attaching each speaker, check that the 

speaker is fixed securely. YAMAHA will bear no 
reponsibility for any accidents caused by improper 
installations. 

You can hang the speakers on a wall using a commercially 
available bracket and screws (Diameter: 6 mm). Attach a 
bracket firmly to the rear of the speakers using screws. 
Then mount a screw on the wall where the speaker is to be 
hung and hook the speaker securely onto the mounted 
screws.

Do not use screw threads neasured in inches for this 
installation. Use metric screw threads only.

Attach the base to the bottom of the front/surround 
speakers (NX-S302) with the supplied base mounting 
screws as shown below. 

Placing the speakers (NX-S302) on the places such as hard 
wooden floor may scratch the surface of the floor.

■ Placing the subwoofer

Attach the non-skid pads to the bottom of the subwoofer 
(NX-SW301), and then place the subwoofer on a level 
hard floor.

Using non-skid pads prevents the subwoofer from sliding 
when it vibrates, and ensure quality sound production.