Yamaha DPX-1 Manual Do Utilizador

RS-232C

DVI

TRIGGER OUT

RGB/YP

B

P

R

/YC

B

C

R

D4 VIDEO

INPUT A

INPUT B

VIDEO

S VIDEO

VD

G/Y

R/P

R

/C

R

HD/SYNC

B/P

B

/C

B

Focuses and zooms the lens

These jacks receive component video and RGB signals.
Component video signals from an A/V component are sent to
the 1—3 jacks. RGB signals from a computer are sent to the
1—5 jacks. Use a BNC cable when connecting this unit to
another component.

1 G/Y (G or luminance signal)
2 B/P

B

/C

B

 (B or color-difference signal)

3 R/P

R

/C

R

 (R or color-difference signal)

4 HD/SYNC (horizontal sync signal, composite sync signal)
5 VD (vertical synchronous signal)

This connector receives video signals from the D connector of
an A/V component and is compatible with the D1—D4 format.

* This connector is designed for the Japanese D format only.

This connector is used for an examination in the factory.

This jack receives S video signals from the S video jack on an
A/V component. Use an S video cable when connecting this
unit to another component.

This terminal is for the composite signal from the video
terminal of the A/V component. Use a video pin cable.

This connector receives component video and RGB signals
(RGB/YP

B

P

R

/YC

B

C

R

) from an A/V component or a computer.

Use a D-Sub monitor cable when connecting this unit to
another component.

This jack outputs signals to control external components. A
potential of +12V will be provided while this unit is projecting.

This connector receives DVI signals (digital RGB) from a
computer.

■ Front panel and terminal panel