Yamaha elb01e1 Manual Do Utilizador

ELB-01 Owner’s Manual

42

Voice Controls and Effects

3

In this display, you can adjust the basic Voice controls, including panning, touch 
sensitivity and volume.
The items included in this page differ between the Pedal Voice sections and the other 
sections. Initial Touch is not applied to the Pedal Voices.

Fine adjustment of the Voice volume. See page 26 for more information.

Determines the amount of reverb applied to each Voice section. 
When the Reverb Depth setting in the Reverb display is set to the minimum, the 
setting here will have no effect. See page 48 for details.
Press the [B] button to make the “÷” indicator flash, then use the DATA CONTROL 
dial to change the setting.

Controls volume and timbre according to the velocity at which you play the keys. The 
harder you play the keys, the greater the volume and the brighter the timbre will 
become.
Higher settings make the change wider. The minimum setting produces no effect. This 
function is not applied to the Pedal Voices.
Press the [C] button to make the “¿” indicator flash, then use the DATA CONTROL 
dial to change the setting.

0 – 14

Determines the octave setting of the Voice, letting you use the Voice over a wide 
register. There are three settings: 4', 8' and 16' (4' is highest and 16' is lowest). A 2' 
setting is added to the Pedal Voice sections. Preset is the original (factory) setting.
Press the [D] button to make the “÷” indicator flash, then use the DATA CONTROL 
dial to change the setting.

VOL.¿24  REV.÷20 ¨1⁄
TOUCH¿ 8 FEET÷PRESET

Initial Touch may not be 
effective on some Voices, 
such as Organ Voices.