Yamaha ga24-12 Manual Do Utilizador

ST (Stereo) section

This section enables you to control the ST bus signals output from the ST1 OUT jacks (see 
page 17, rear panel 

9

) and ST2 OUT jacks (see page 17, rear panel 

J

).

A

This switch toggles between pre- and post-fader for signals output from the ST2 OUT jacks. 
When you turn this switch on, signals that passed the ST fader are output from the ST2 OUT 
jacks. When you turn the switch off, the ST fader setting does not affect signals output from the 
ST2 OUT jacks.

B

When you turn this switch on, the ST bus signals will be mixed into a monaural signal and 
output from the ST2 OUT jacks. This switch setting does not affect signals output from the ST1 
OUT jacks.

C

This control enables you to adjust the output level of signals at the ST2 OUT jacks. It does not 
affect the level of signals output from the ST1 OUT jacks.

D

When you turn this switch on, the ST bus post-fader signals are routed to the AFL bus, and you 
can monitor the signals via the C-R MONITOR OUT jacks or PHONES jack.

E

This fader enables you to adjust the final output level of the ST bus signals. This fader setting 
affects the level of the signals routed to the ST1 OUT jacks, ST2 OUT jacks (when the POST 
ST1 switch is turned on), and the AFL bus.

Signal flow in the ST section

1

2

3

4

5

ST2
OUT

ST1
OUT

REC
OUT

ST
INSERT
I/O  L

ST
INSERT
I/O  R

R

L

R

L

R

L

POST

ST1

AFL
L R

AFL

LEVEL

MONO

R

L

ST