Yamaha mfc10 Manual Do Utilizador
10
Normal Mode
To change and select all digits.
Press [
x
10] two times.
If the 100's digit value is 1, it will change to
0, if it is 0 it will change to 1. (The 10's digit
flashes indicating input standby.)
flashes indicating input standby.)
Press [1]-[0], to select the 10's digit value.
(The 1's digit flashes indicating input standby.)
Once again, press [1]-[0] to select the 1's digit
value.
• When [x10] is pressed twice, the 100's digit value will
alternate between 1 and 0.
• Attempting to select the number 000, will result in 001
being selected. Also, inputting any value above 128
will result in 128 being selected.
■
Program Change Memory Edit...........................................................
The following 4 types of MIDI data can be transmitted with Program Change Memory.
The transmitting Channel Number and MIDI data can be stored to individual Memory Numbers.
• STATUS
C0
CF
~
C0
Channel 1
C1
Channel 2
C2
Channel 3
C3
Channel 4
C4
Channel 5
C5
Channel 6
C6
Channel 7
C7
Channel 8
C8
Channel 9
C9
Channel 10
CA
Channel 11
Cb
Channel 12
CC
Channel 13
Cd
Channel 14
CE
Channel 15
CF
Channel 16
Cn (n=MIDI channel numbers 1-16) assigns the MIDI channel for voice selection. The
number is shown in hexadecimal.
number is shown in hexadecimal.
Example:
To change the current Memory Number 048 to
126, press [x10], [X10], [2], [6] in that order.
Two times
048
126
• BANK MSB (Bank Select MSB)
• BANK LSB (Bank Select LSB)
• BANK LSB (Bank Select LSB)
000
oFF
127
~
,
Bank select numbers are used to access voices other than the 128 voices normally available in
MIDI devices and GM devices. Program change data and bank select data (BANK MSB/
LSB:off, 000-127) must be transmitted together to access these voices.
Refer to the owner's manual of the receiving device for specific information on bank select data.
MIDI devices and GM devices. Program change data and bank select data (BANK MSB/
LSB:off, 000-127) must be transmitted together to access these voices.
Refer to the owner's manual of the receiving device for specific information on bank select data.
• DATA/CTRL
001
128
~
Sets program numbers (voice numbers 001-128) for transmission.
Refer to the owner's manual of the receiving device for details on voice assignments.
Refer to a GM voice map for the 128 voice allocations of GM MIDI devices.
Refer to the owner's manual of the receiving device for details on voice assignments.
Refer to a GM voice map for the 128 voice allocations of GM MIDI devices.
• The default settings for each memory (001-128) is as
follows.
STATUS=C0 (Channel Number 1), DATA/CTRL=001-128
(same as the memory number), BANK MSB/MAX=off,
BANK LSB/MIN=off.