Yamaha M3000-24 Manual Do Utilizador

About the Scene Memory function

In check mode you can verify the settings of a scene 
before recalling it, or edit the on/off status of the ON/
EDIT keys without affecting the internal audio sig-
nals. To move from normal mode to check mode, 
press the CHECK switch in the scene memory section.

1. If the M3000 is in normal mode, press the scene 

memory section CHECK switch.

The CHECK switch LED will light, and the M3000 
will enter check mode.

2. Use the scene memory section 

▲

/

▼

 switches or 

the 0–9/ENTER buttons to make the MEMORY 
display indicate the scene number that you wish 
to check. (If you use the 0–9 buttons to change 
the number, your selection will not be finalized 
until you press the ENTER button.)

The CHECK indicators of the input channels, mix 
section, and STEREO A section will indicate the on 
(lit)/off (dark) status of that scene. This allows you to 
verify the settings of each channel before actually 
recalling that scene.

3. To recall the selected scene, press the RECALL 

switch.

The scene will be recalled, and you will simulta-
neously exit check mode and return to normal mode. 
(In this case, the operation of step 4 is not necessary.)

4. To exit check mode without changing the scene, 

press the CHECK switch once again.

The M3000 will return to normal mode, and the 
CHECK indicator will go dark.

In check mode, you can edit the on/off state of the 
ON/EDIT switches without affecting the actual on/off 
settings. This is convenient when you wish to store a 
scene for later use while maintaining the current on/
off settings.

1. When the M3000 is in normal mode, press the 

scene memory section CHECK switch.

The CHECK switch LED will light, and the M3000 
will enter check mode.

2. Use the 

▲

/

▼

 switches of the scene memory sec-

tion to make the MEMORY display indicate the 
scene number for the desired storing destination.

The CHECK indicators of the input channels, mix 
section, and STEREO A section will be lit or dark to 
indicate the on/off status of that scene.

3. Use the CHECK indicator ON/EDIT switches of 

the input channels, mix sections, and STEREO A 
section to edit the on/off state.

In check mode, the ON/EDIT switches will edit the 
on/off state of the scene, but will not affect the actual 
on/off state. If even one point of the on/off state of the 
scene is modified, a decimal point will light in the 
lower right of the MEMORY display.

4. To store the edited on/off settings in the scene, 

press the STORE switch twice.

In check mode, the STORE switch functions in the 
same way as in normal mode. You can cancel the Store 
operation by pressing a different switch before press-
ing the STORE switch the second time.

5. To exit check mode, press the CHECK switch 

once again. Alternatively, you can recall the 
scene that you stored.

The M3000 will return to normal mode, and the 
CHECK indicator will go dark.

Note: Check mode cannot be used together with 
the DIRECT RECALL 1–8 switches. When the 
M3000 is in check mode, pressing a DIRECT 
RECALL 1–8 switch will cause the corresponding 
scene to be recalled immediately, and the M3000 
will forcibly return to normal mode.