Yamaha MM8 Manual Do Utilizador
Setting Up
MM6/MM8 Owner’s Manual
11
Turn down the volume by turning the [MASTER VOL-
UME] control to the left and press the [STANDBY/ON]
switch to turn on the power. Press the [STANDBY/ON]
switch again to turn the power OFF.
UME] control to the left and press the [STANDBY/ON]
switch to turn on the power. Press the [STANDBY/ON]
switch again to turn the power OFF.
Backup data is loaded from the internal flash memory
when the power is turned on. If no backup data exists in
the flash memory, all instrument settings are restored to
the initial factory defaults.
when the power is turned on. If no backup data exists in
the flash memory, all instrument settings are restored to
the initial factory defaults.
Set the MM6/MM8 and external playback equipment
volume controls to appropriate levels. If necessary,
adjust the legibility of the LCD display by using the
LCD Contrast Control.
volume controls to appropriate levels. If necessary,
adjust the legibility of the LCD display by using the
LCD Contrast Control.
Turning the Power On
Press the [STANDBY/ON]
switch.
Rotate the [MASTER VOLUME]
control counter-clockwise.
• Even when the switch is in the “STANDBY” position, a minute
electrical current is present in the instrument. If you will not be
using the instrument for an extended period of time, make sure
you unplug the AC power adaptor from the wall AC outlet.
using the instrument for an extended period of time, make sure
you unplug the AC power adaptor from the wall AC outlet.
CAUTION
• Never attempt to turn the power off when a “Writing..” message is
showing on the display. Doing so can damage the flash memory
and result in a loss of data.
and result in a loss of data.
CAUTION
Adjust Volume and Display Contrast
Contrast Adjustment
[MASTER VOLUME]
Control Adjustment