Yamaha mdf3 Manual Do Utilizador
32
Recording Sequence Data
1. Check your MIDI connections.
The MIDI IN jack of the MDF3 should
be connected to the MIDI OUT jack of
the sending device.
be connected to the MIDI OUT jack of
the sending device.
If you have not done so already, place a
formatted disk in the MDF3 disk drive.
formatted disk in the MDF3 disk drive.
2. Enter SEQ mode.
Press the SEQ key. The LED above the
key will light, and the name of the cur-
rently selected SEQ data file will appear
in the LCD.
key will light, and the name of the cur-
rently selected SEQ data file will appear
in the LCD.
3. Select an empty file.
Using the FILE DATA keys, select the
number of the empty file where you want
to record the data. (The names of empty
files will be blank.)
number of the empty file where you want
to record the data. (The names of empty
files will be blank.)
Note:
If you select a file which already con-
tains data, that data will be erased when the
incoming data is received. If you choose such
a file, make sure it does not contain data that
you want to keep.
incoming data is received. If you choose such
a file, make sure it does not contain data that
you want to keep.
MIDI IN
MDF3
MIDI cable
MIDI OUT
~
å
02
~
å
01
~~~~~~
SONGå01
file number
file name