Yamaha MOTIF XF Manual Do Utilizador

Voice Editor Essential Owner’s Manual 

2

This window lets you set the parameters common to all the displays.

Each lamp flashes according to the MIDI in/out

messages.

Tapping this opens or closes the Utility window.

Set this to the same number as that of the instrument.

Selects the connected instrument.

When set to on, tapping [RECEIVE] calls up a

confirmation message.

Tapping this calls up the Owner’s Manual.

Tapping here initializes all the settings.

Determines the connection method between the iPad

and MIDI instrument.
cable:

Should be selected when connected via the

i-MX1.
wireless:

Should be selected when connected via

wireless Network MIDI.

When set to “wireless,” make the Wi-Fi setup in Settings > Wi-Fi in
your iPad.

Determines the knob behavior.
rotary:

Dragging around the knob will rotate it in the

same direction.
linear:

Dragging vertically upward from the knob

rotates the knob clockwise, and dragging downward

rotates counter-clockwise.

Determines the Fader behavior.
jump:

The Fader jumps to any tapped location in

the Fader area.
catch:

The Fader will be “caught” as you drag on it.

Title bar

Sets the MIDI Transmit Channel.

Selects the MIDI port of the instrument in case of

wireless connection.

When set to on, selecting a Template* transmits the

corresponding settings via MIDI.

Assigns the MIDI Control Change numbers to each

controller.

Each of the Templates includes the settings of all the

displays, meaning that you can call up all the Effect

settings just by selecting the desired Template. Each

of the Templates can be renamed, called up and

initialized.