Yamaha MOTIF-RACK Manual Do Utilizador

You can save up to 128 Multis to internal memory.
For details about storing Multis, see page 57.

n Press the [MULTI] button to return to the Multi Play 

mode.

n Press the [EDIT] button to enter the Multi Edit mode.

When playing a Plug-in Voice or Board Voice, be sure 
to make the following appropriate settings.

• Assign the desired Board Voice or Plug-in Voice 

to the Plug-in Part. In the Voice display of the 
Mixing Edit mode or Multi Part Edit mode, select 
the appropriate bank and desired Voice number 
(pages 44, 46). For example, when you play a 
Plug-in board Voice installed to PLG1, select 
PRE1 (preset Plug-in voice bank 1) or Pp1 
(Board voice bank 1) in the Bank parameter.

n In the Mixing Edit/ Multi Part Edit mode, you can 

select Parts in succession by simultaneously 
holding the [SHIFT] button and using the PART 
[

E

E

E

E

][

F

F

F

F

] buttons. The Plug-in Parts can be 

selected following Part 16.

• Set the Receive Channel of the Plug-in Part to the 

same channel as the Transmit Channel of the 
track of the connected device (such as a 
sequencer) from which the data is to be played.  
This setting can be changed from the ReceiveCh 
parameter (Ref. # 32, page 64) in the Voice 
display of the Multi Part Edit mode.  The default 
settings are 1 for PLG1 part, and 2 for PLG2. 

n You can assign the Plug-in Part to any of the 

available ports with the PortNo. parameter in the 
PLG1Sys/PLG2Sys display of the Utility mode  
(page 21).

The Multi Edit mode has a detailed mixing function 
that lets you change the Multi parameter settings in the 
same way as the Voice Edit mode.
There are two types of Multi Edit displays: those for 
Common Edit, and those for editing individual parts 
(Part Edit). Use Common Edit to edit the settings 
common to all Parts and Part Edit to edit the settings 
for individual Parts. 

n Common Edit operations cannot be performed on the 

Multi-part Plug-in Parts 17 - 32.

n You can hear the difference between the newly edited 

Multi and the same Multi prior to editing (Compare) 
(page 38).

n The particular part(s) can be switched on/off 

temporarily (Mute) (page 38).

Press the [EDIT] button in the Multi Play mode or the 
Mixing Edit mode. The LED lights, indicating that the 
Multi Edit mode is selected.

Simultaneously hold down the [SHIFT] button and 
press the [COMMON] button to call up the Common 
Edit display.

Indicates a Common Edit (all Parts) display.

Indicates a display for editing Part parameters.