Yamaha MU128 Manual Do Utilizador
66
MU128 Guided Tour
Making Changes to Individual Drum Sounds — the “Drum” Parameters
The Drum parameters provide extraordinary flexibility, since they allow you
to make independent settings for the individual drum/percussion sounds in a
Drum Part. We’ll explore a couple of the possiblilities here:
to make independent settings for the individual drum/percussion sounds in a
Drum Part. We’ll explore a couple of the possiblilities here:
Operation
1 Select “DRUM” from the Edit menus (with the [SELECT </>]
buttons) and press [ENTER].
2 Select “E3: Conga L.”
Play E3 on the connected MIDI keyboard, or use the [PART
-/
+] buttons to select “E3.”
Details
In the Drum parameters you cannot use the [PART
In the Drum parameters you cannot use the [PART
-
/
+
] buttons to select a Part;
they are reserved for selecting notes/sounds only.
3 Select the Pitch Coarse parameter, and set it to “-22.”
Use the [SELECT
</>] buttons to select the parameter, then the
[VALUE
-/+] buttons or data dial. This setting creates a deep
log drum sound.
4 Select the Velocity Pitch Sensitivity parameter (VelPchSens), and
set it to “+12.”
Again use the [SELECT
Again use the [SELECT
</>] buttons, then the [VALUE -/+]
buttons or data dial. Play the key softly to strongly and notice
how the pitch changes according to key velocity.
how the pitch changes according to key velocity.
Editing in the Multi Mode