Yamaha MW10c Manual Do Utilizador

MW8CX/MW10C   Owner’s Manual

■ Electrical Specifications

■ General Specifications

All level controls are nominal if not specified.
Output impedance of signal generator: 150 ohms

* The MW8CX feature is described first, followed by the MW10C feature in brackets: MW8CX (MW10C)

Frequency Response

STEREO OUT GAIN: min (CHs 1–5/6)

20 Hz–20 kHz
Nominal output level @1 kHz

-3.0

1.0

dB

EFFECT SEND

(AUX SEND*)

-3.0

1.0

MONITOR OUT, REC OUT

-3.0

1.0

Total Harmonic Distor-
tion (THD + N)

STEREO OUT +14 dBu, 20 Hz–20 kHz, Input Gain Control at minimum

0.1

%

Hum & Noise

Hum & Noise are mea-
sured with a 6 dB/
octave filter @12.7 
kHz; equivalent to a 20 
kHz filter with infinite 
dB/octave attenuation.

Input: CH INPUT 1, 2 MIC EIN (Equivalent Input Noise): Rs = 150 

Ω, GAIN: maximum 

(CH1, 2)

-128

dBu

STEREO OUT STEREO Master control at nominal level and all CH Level con-

trol at minimum.

-87

EFFECT SEND

(AUX SEND*)

All CH EFFECT (AUX*) controls at minimum.

-85

STEREO OUT STEREO Master control and one CH level control at nominal 

level (CH1, 2)

-64

STEREO OUT Residual Output Noise

-100

Crosstalk (1 kHz)

Adjacent Input CH1, 2

-70

dB

Input to Output STEREO L/R, CH 1, 2, PAN: panned hard left or right

-70

Maximum Voltage Gain 
(1 kHz)

All level controls are 
maximum when mea-
sured
PAN/BAL: panned 
hard left or hard right.

Rs = 150 

Ω

INPUT GAIN: maximum

MIC to CH INSERT OUT

60

dB

MIC to STEREO OUT

76

MIC to REC OUT

58.2

MIC to MONITOR OUT

92

MIC to PHONES OUT

81

MIC to EFFECT SEND (AUX SEND*)

76

LINE to STEREO OUT

50

LINE to EFFECT SEND (AUX SEND*)

47

ST CH 7/8, (CHs 7/8, 9/10*) to STEREO OUT

26

Rs = 150 

Ω RETURN to STEREO OUT

12

Rs = 600 

Ω 2TR IN to STEREO OUT

23.8

Phantom Voltage

MIC no load

48

V

USB Audio

Input/Output: 44.1/48 kHz

Input HPF

CHs 1–5/6, 80 Hz, 12 dB/oct

Input Equalization

Turn over/roll-off frequency 
of shelving: 3 dB below 
maximum variable level.
±15 dB maximum

CHs 1–5/6 HIGH: 10 kHz (shelving)

MID: 2.5 kHz (peaking)
LOW: 100 Hz (shelving)

CH 7/8 (CHs 7/8, 9/10*) HIGH: 10 kHz (shelving)

LOW: 100 Hz (shelving)

PEAK Indicator

Red LED turns on when post EQ signal (either post MIC HA or post EQ signal for 
CHs 3/4, 5/6) reaches -3 dB below clipping (+17 dBu).

Internal Digital Effect 
(Only MW8CX)

16 PROGRAM, PARAMETER control
Foot Switch (Digital Effect On/Off)

LED Level Meter

Pre MONITOR Level 2x7 points LED meter (PEAK, +6, +3, 0, -5, -10, -20 dB)

PEAK lights if the signal level reaches 3 dB below the clipping level.

Power Supply Adaptor

PA-10 AC 38 VCT, 0.62 A, Cable Length = 3.6 m

Power Consumption

21 W

Dimensions (W x H x D)

256.6 mm x 62.2 mm x 302.5 mm

Net Weight

1.7 kg (MW8CX), 1.6 kg (MW10C)