Yamaha MU50 Manual Do Utilizador

1 Select the desired note number and its assigned drum sound with

the P A R T  

P A R T  

P A R T  

P A R T  

P A R T  

q buttons.

For a list of the available sounds and their note assignments, see
the SOUND LIST & MIDI DATA

SOUND LIST & MIDI DATA

SOUND LIST & MIDI DATA

SOUND LIST & MIDI DATA

SOUND LIST & MIDI DATA booklet.

HINT
You can also select the desired note number by simply pressing the appropriate key on a
connected MIDI keyboard.

2 Select the desired parameter with the SELECT

SELECT

SELECT

SELECT

SELECT 

w buttons.

Refer to the descriptions below for details on the individual pa-
rameters.

3 Change the parameter value with the VALUE

VALUE

VALUE

VALUE

VALUE 

q buttons.

Drum Setup Parameters

Range:

–64 — +63

This determines the coarse pitch setting of the selected drum sound.
This parameter is only available when the Part Mode has been set to
drumS1 or drumS2.  (See page 53.)

Range:

–64 — +63

This determines the fine pitch setting of the selected drum sound.

Range:

0 — 127

This determines the volume of the selected drum sound.

Settings: Rnd  (Random),  L63  —  C  —  R63

This determines the stereo position of the selected drum sound. A
setting of “Rnd” (Random) randomly assigns the drum to a pan po-
sition. This is useful when you want to have different drums sound
from different random parts of the stereo image.

Range:

0 — 127

This determines the level of the selected drum sound that is sent to
the Reverb effect. A value of 0 results in a completely “dry” drum
sound, no matter how much Reverb is applied to the Drum Part.