Yamaha O2R Manual Do Utilizador

MIXING Display Functions

When channels are configured as a stereo pair, pan controls remain 
independent. Using the Gang function pan controls of adjacent channels 
can be ganged together, indicated by dotted lines between the two controls, 
as shown below.

To cancel the Gang function, press the [ENTER] button again. The dotted 
lines between the pan controls disappear.

When channels are configured as a stereo pair, the width of a stereo signal 
can be set using the pan controls. When the pan controls are set hard-left 
and hard-right, the stereo width is 100%. With both pans set to center the 
stereo width is 0%. Setting the controls to a position in between allows you 
to set the stereo width from 0% to 100%. To maintain a central balance, 
however, you must set both controls to a corresponding left and right 
values. For example, L5 and R5, or L10 and R10.

Including center, there are 33 pan positions

:

←

←

←

←

←

→

→

→

→

→