Yamaha O2R Manual Do Utilizador
72
Surround Pan
02R User’s Guide
Linking Channels for Surround Pan
For stereo input channels (17 to 24), or mono input channels configured as a
stereo pair, you can select one of eight patterns and move both sounds
together. The following illustration shows how the two channels are
panned with the various patterns and trajectories.
stereo pair, you can select one of eight patterns and move both sounds
together. The following illustration shows how the two channels are
panned with the various patterns and trajectories.
By default, ST LINK is turned on for stereo channels. Note that if just the ST
LINK parameter is turned off, it is possible to overwrite the pan
movements of the other channel during subsequent automix recording.
LINK parameter is turned off, it is possible to overwrite the pan
movements of the other channel during subsequent automix recording.
Note:
ST LINK settings are not stored in channel library programs. So when a
channel program is recalled and the destination channel is using ST LINK, the
surround settings of the other linked channel are changed to match. Also, when the
surround settings of a stereo channel are stored, only the settings of the selected
channel are stored.
surround settings of the other linked channel are changed to match. Also, when the
surround settings of a stereo channel are stored, only the settings of the selected
channel are stored.
1.
Use the [ROUTING]
button to locate the
ROUTING 4/4 page.
button to locate the
ROUTING 4/4 page.
2.
Use the [SEL) buttons to
select a channel.
select a channel.
3.
Use the CURSOR buttons
to select the ST LINK
icon, and then press the
(ENTER) button.
to select the ST LINK
icon, and then press the
(ENTER) button.
4.
Use the CURSOR buttons
to select the PATTERN
parameter, and the
encoder wheel to select
a pattern.
to select the PATTERN
parameter, and the
encoder wheel to select
a pattern.
ROUTING
Pattern
Trajectory